Impinj M730 Sticker Manufacturer
RFIDAK supplies Impinj M730 stickers from our Shenzhen factory with 1,000 stickers minimum order, 7-12 working days lead time, and full EPC Class 1 Gen 2 v2 / ISO/IEC 18000-63 / RAIN RFID compliance — used for new retail item tagging and eu dpp pilots.
Quick spec — Impinj M730 Sticker
Chip technical brief
Impinj M730 (released 2022) is the latest-generation high-volume RAIN chip, providing -22.5 dBm sensitivity (1 dB better than R6), 128-bit EPC, and Impinj Authentication Service support for end-consumer brand-protection use cases. Compared to R6, M730 reads slightly further at the same antenna power and supports a phone-tap authentication pattern that complements EU Digital Product Passport pilots. Default chip for new RAIN deployments starting 2024.
Buyer one-liner
Newest RAIN chip (2022); +1 dB read sensitivity, anti-counterfeit ready, EU DPP compatible.
Typical use cases
- ▸ New retail item tagging
- ▸ EU DPP pilots
- ▸ Brand-protection consumer apps
- ▸ Modernized supply chain
Compatible readers
- ▸ Impinj Speedway / R700
- ▸ Zebra FX9600 (firmware update may be needed)
Sticker manufacturing
RFID and NFC stickers are flexible adhesive labels with the chip + antenna inlay sandwiched between a face material (paper, PVC, or PET) and an adhesive release liner. Standard production uses a wet-inlay with permanent acrylic adhesive (peel-and-stick application), although removable adhesives, tamper-evident slits, and on-metal foam spacers are available as variants. Stickers are die-cut to specified shape (round, rectangular, custom), printed with thermal-transfer or CMYK depending on substrate, and shipped on continuous-roll or sheet format depending on customer application equipment. Standard MOQ for stickers is 5,000 units due to inlay-roll batch size; smaller pilot batches of 500-1,000 are possible at +30% per unit.
Typical sizes
- • Φ22 mm
- • Φ30 mm
- • 25 × 25 mm
- • 38 × 25 mm
- • 50 × 30 mm
- • 70 × 40 mm
- • Custom
Materials
- • PET coated paper
- • PVC
- • White synthetic paper
- • Anti-tear film
Compliance
- • CE
- • RoHS
- • FCC Part 15
Why source Impinj M730 stickers from RFIDAK
Impinj M730 (2022) is the latest-generation high-volume RAIN chip with -22.5 dBm sensitivity (+1 dB over Monza R6) and Impinj Authentication Service support for end-consumer brand-protection scanning. M730 is the default chip for new RAIN deployments starting 2024 and for brands preparing for EU Digital Product Passport (DPP) phone-tap authentication patterns.
Buyer snapshot
Greenfield retail deployments (2024+), brand-protection / anti-counterfeit programs, EU DPP pilots, and supply-chain modernization projects.
Anonymized project examples
Example 1
A US specialty retailer chose Impinj M730 stickers for their 2024 launch of item-level tagging across 600 stores, taking the +1 dB sensitivity advantage to spec slightly fewer dock-door antennas than a Monza R6-based design would have required.
Example 2
A European luxury brand piloted M730 stickers across 80,000 handbag tags in 2024 with phone-tap brand-authentication via Impinj Authentication Service.
Compare with other stickers
Other chips that work in sticker format. Use this as a quick selector before requesting samples — RFIDAK ships free 3-5 unit test packs across multiple chip options.
| Chip | Memory | Security | Typical Use | Cost Tier |
|---|---|---|---|---|
| Impinj M730 (this page) | 128-bit EPC, 32-bit user | Standard access + kill password | New retail item tagging | $$ |
| Impinj Monza R6 | 96-bit EPC, 32-bit User | 32-bit access password, kill password | Retail item-level tagging | $ |
| MIFARE Classic 1K | 1,024 bytes EEPROM | Crypto-1 (deprecated since 2008 | Hotel key cards (Saflok / VingCard / Onity legacy) | $ |
| MIFARE Ultralight EV1 | 48 bytes user memory | 32-bit password protection + ECC originality signature | Single-trip transit tickets | $ |
| MIFARE Ultralight C | 144 bytes user memory | 3DES authentication | Reusable single-line transit | $$ |
Recommended RFIDAK SKUs
These products in our catalog ship with Impinj M730 as a chip option.
Frequently asked — Impinj M730 stickers
What is the minimum order quantity for Impinj M730 stickers? ▾
1,000 stickers is the standard MOQ. Smaller pilot batches may be possible at +15-30% per unit. For 5,000+ orders, volume discounts of 5-10% typically apply; 50,000+ orders move to direct-import pricing tiers.
Which readers are tested compatible with RFIDAK Impinj M730 stickers? ▾
Impinj Speedway / R700, Zebra FX9600 (firmware update may be needed). RFIDAK ships free 3-5 unit test packs to integrators evaluating reader compatibility before bulk commitment.
Can RFIDAK pre-encode Impinj M730 stickers to our specification? ▾
Yes. For UID-only chips, customer-supplied EPC / NDEF / data-block content is written before shipment. Per-unit pre-encoding pricing is typically +$0.05-0.20 depending on complexity.
What lead time should I plan for Impinj M730 stickers to major export markets? ▾
7-12 working days production from artwork approval, then 4-6 days DHL air or 18-30 days sea freight. Total door-to-door is typically 18-22 days air or 30-45 days sea. CE-marked products clear EU customs without additional documentation.
Are RFIDAK Impinj M730 stickers compliant with CE? ▾
Yes. RFIDAK Impinj M730 stickers carry CE, RoHS, FCC Part 15 compliance. Test reports are available on request under NDA.
Ready to source Impinj M730 stickers?
Get pricing in 24 hours and free 3-5 unit samples to validate before bulk commitment. MOQ: 1,000 stickers · Lead time: 7-12 working days.
Get a Quote — 24h ResponseGet Free RFID Samples
Try before you buy. Request free samples of any RFID product from our 50+ SKU catalog. Samples shipped via DHL/FedEx within 1-3 business days worldwide.
Not ready to chat? Just drop your email and we'll send the RFIDAK product catalog (PDF).
We'll only use your email to send the catalog and reply to your inquiry.