UHF label buying guide
Impinj Monza R6 UHF RFID labels
Request Impinj Monza R6 UHF labels from RFIDAK for an external EPC Gen2 reader workflow. Confirm the inlay, chip availability and sample acceptance before ordering. Specify the installation country, tagged item, EPC format and reading task. The standard label MOQ baseline is 1,000 pieces; configuration, sample terms and delivery are confirmed in the quote.
Your chip preference carries into the editable inquiry.
Quick spec — Impinj Monza R6 Sticker
- Chip memory
- Impinj Monza R6 · Up to 96-bit EPC; no user memory; factory-programmed TID is separate
- Radio protocol
- UHF EPC Gen2 / ISO/IEC 18000-63; match the regional band
- Reading hardware
- External UHF reader; a phone’s built-in NFC does not read this label
- Finished construction
- Approve inlay, size, adhesive, tagged item and supply format
- MOQ baseline
- 1,000 pieces; confirm chip and configuration
- Samples and delivery
- Agree availability, charges, freight and schedule
Chip technical brief
The Monza R6 datasheet lists up to 96 bits of EPC memory, no user memory and a factory-programmed TID containing a 48-bit serial number. Standard R6 has no access or kill password and is not killable; do not apply R6-P memory or password features to it. For repeat supply, identify the approved inlay, EPC format, printed-data mapping and any lock requirements. Confirm actual chip availability and any proposed substitution. Chip sensitivity does not establish a finished-label read distance. Validate the label material, adhesive, mounting object, orientation, nearby metal or liquid, installed antennas, reader power and software in the intended country. A phone with only built-in HF NFC cannot read this UHF chip. Retailer acceptance depends on the specified finished tag and encoding process.
Technical references: Impinj Monza R6 — manufacturer specifications. Confirm the exact chip variant and current supply status; specifications for a chip do not certify a finished label or retail program.
Selection checkpoint
Match an approved R6 configuration for repeat supply: up to 96-bit EPC, no user memory, and system-level sample testing.
Typical use cases
- ▸Repeat supply of approved retail labels
- ▸Item identification using an approved 96-bit EPC scheme
- ▸Warehouse or supply-chain labels with a verified reading task
Reader requirements to validate
- ▸UHF EPC Gen2 readers: confirm the exact reader, antenna, country setting, firmware and software
- ▸UHF-capable printer encoders: verify inlay position, EPC data and read-back processing
Specify the UHF label on the actual item
RFID and NFC stickers combine a chip-and-antenna inlay with a face material, adhesive and release liner. Specify NFC or UHF first: they require the appropriate chip, frequency, protocol and reader. A UHF label does not serve a phone's built-in NFC reader. For metal or foil, select a construction designed for that technology and surface. NFC may require a ferrite isolation layer; UHF on-metal labels use their own antenna and mounting construction. Do not treat those layers as interchangeable. Approve the dimensions, inlay position, face material, adhesive, printing and individual, sheet or roll supply. Test the mounted label with the intended phones or readers and actual contents, curvature and exposure. Ask for material or performance documents for the selected article. The standard tags-and-labels baseline is 1,000 pieces; confirm configuration, quantity per design, encoding, sample charges, freight and production schedule in the quote.
Size and supply format
- • Round, square or rectangular: dimensions and inlay position to approve
- • Custom die-cut shape subject to construction review
Materials
- • Paper or polymer face material selected for printing and exposure
- • Adhesive and release liner matched to the mounting surface
Document scope to verify
Request documents for the exact article, materials and destination. Confirm current scope and sample acceptance before ordering.
Define the reading task before comparing distance
A chip name does not establish a finished label’s read range. Agree the item, label position, reader and antenna, regional settings, orientation and required reading zone. Include metal, liquid and neighboring tagged items in the sample test.
- Record the setup. Keep the inlay, surface, reader, antenna, power settings and distance consistent across candidate samples.
- Use known item counts. Test representative motion, spacing and orientation; distinguish missed items from unwanted reads outside the zone.
- Check encoding separately. Verify the approved EPC and printed identifier map, duplicates and rejected labels. A readable tag may still contain the wrong identifier.
- Agree acceptance. Document the required result and the approved configuration before bulk production or a component change.
Plan your Impinj Monza R6 label order
Start a Monza R6 repeat order with the label or inlay already approved for your system. R6 provides up to 96-bit EPC memory and no user memory; its memory and password behavior differ from R6-P. Identify the inlay, label dimensions, face material, adhesive, roll format and EPC data map before comparing samples. State every deployment country so the operating sub-band and reader settings can be checked. Test the mounted label, surrounding items and installed reader software together. A chip name does not establish a fixed read range or acceptance under a retailer program.
Who this chip fits
Buyers replenishing a previously approved R6 label, packaging suppliers preserving a customer specification, and integrators checking replacement stock against an installed UHF reading system.
Planning examples
Illustrative evaluation plans, not reported customer results.
Example 1
Planning example (not a customer case): A packaging buyer has an approved R6 label and needs a repeat batch. Compare the old sample and proposed batch on the same objects, verify chip and inlay identity, inspect print-to-EPC mapping, and approve any material or encoding change before ordering.
Example 2
Planning example (not a customer case): An integrator tests one proposed R6 label across two distribution sites. Record each site's country settings, readers, antennas, item orientation and packing density, then agree acceptance criteria from the actual reading task.
Monza R6 vs M730 vs UCODE 8 labels
These are chip-level differences, not a ranking of label reading distance. Confirm the exact inlay, EPC format, access rules and available construction. A common protocol does not establish that an encoder, retailer program or installed system has approved the label.
On smaller screens, scroll the table horizontally to compare all fields.
| Chip | Memory | Access control | Selection checkpoint | Supply and quote |
|---|---|---|---|---|
| Impinj Monza R6 (this page) | Up to 96-bit EPC; no user memory; factory-programmed TID is separate | Standard Monza R6 has no access or kill password and is not killable; confirm EPC encoding and lock requirements | Existing 96-bit EPC requirements; verify that access and kill passwords are not required | Confirm chip, inlay, conversion and quantity |
| Impinj M730 | 128-bit EPC; no user memory; factory-programmed TID is separate | Shared 32-bit access/kill password storage; approve configuration and lock rules. Password access is not cryptographic product authentication | A 128-bit EPC requirement; validate encoding and shared password behavior | Confirm chip, inlay, conversion and quantity |
| NXP UCODE 8 | 128-bit EPC; 0-bit user memory | 32-bit access and kill passwords; confirm encoding and lock rules | A specified UCODE 8 configuration; approve supply or any proposed substitute | NXP: No Longer Manufactured; confirm supply |
Choose your label construction
Use the UHF label product guide to specify the surface, printing, encoding and supply format. Confirm Impinj Monza R6 availability and the finished label in your quotation.
Frequently asked — Impinj Monza R6 stickers
Is Monza R6 the same as Monza R6-P?▾
No. The standard Monza R6 datasheet lists up to 96 bits of EPC memory and no user memory. R6 also has no access or kill password and is not killable. R6-P is a different device with other memory and password features. Confirm the complete chip name, approved inlay and required lock behavior in the order record.
What should I provide for a Monza R6 repeat order?▾
Send the approved label or inlay identifier, a sample or drawing, EPC format, printed-data mapping, material, adhesive, roll requirements, quantity and deployment countries. Identify any configuration that must remain unchanged. The standard tags-and-labels baseline is 1,000 pieces; availability, samples, quantities per design, production and freight require quotation confirmation.
How far will a finished Monza R6 sticker read?▾
A chip name does not establish a finished-label distance. Readability depends on the inlay and antenna, mounting material, nearby metal or liquid, orientation, packing density, reader antenna, power, regional settings and software. Specify the reading task and test mounted samples with the installed equipment. Agree the acceptance threshold before production.
Does a Monza R6 chip make a sticker compliant with a retailer tagging program?▾
No. Obtain the current written requirements for the specific item category and market, including any required inlay approval, encoding, placement and label testing. Confirm that the proposed finished label and production process meet those requirements. Neither a chip brand nor a generic UHF protocol is evidence of approval.
How should EPC encoding and reader compatibility be checked?▾
Provide an EPC format that fits the R6 capacity, serialization rules, any permanent lock requirement and the mapping to printed data. Treat the factory TID as a separate identifier. Agree read-back verification, duplicate handling and rejected-label records. Test the exact UHF reader or printer encoder and software; a phone with only built-in NFC cannot read R6.
Ready to source Impinj Monza R6 stickers?
Send the Impinj Monza R6 preference, installation country, reader and encoder models, tagged item, EPC format, label requirements, quantity and destination. Request separate sample, setup, unit and freight costs with an agreed schedule.
Request Impinj Monza R6 Pricing