NXP NTAG213 NFC Coin Supplier
RFIDAK can source NXP NTAG213 nfc coins for a specified reader and application. MOQ guidance for this format: Confirm by disc construction, chip and quantity per design. Confirm the exact chip, finished construction, applicable standards, sample terms and production schedule in a written quote.
Quick spec — NXP NTAG213 NFC Coin
- Chip
- NXP NTAG213
- Frequency
- 13.56 MHz
- Standards
- ISO/IEC 14443 Type A / NFC Forum Type 2 Tag
- Memory
- 144 bytes user memory; allow for NDEF formatting overhead
- Security
- Permanent page locking; configurable 32-bit password for memory access; ECC chip-originality signature. No encrypted communication or per-tap message authentication
- Form Factor
- NFC Coin (Confirm diameter and thickness from the selected model drawing)
- Materials
- PVC or other specified disc substrate / Adhesive or fixture attachment selected for the host surface
- MOQ
- Confirm by disc construction, chip and quantity per design
- Lead Time
- Confirm production and transit dates in the quote
Chip technical brief
NTAG213 uses NXP ordering codes beginning NT2H1311G0; confirm the complete code and package for the supplied construction. Its 144-byte user area must accommodate the approved NDEF layout and encoding overhead, so a fixed URL character limit is not a sufficient sizing rule. The manufacturer-programmed 7-byte UID is separate from writable customer content. Permanent lock bits cannot be reversed; approve the final payload before locking. For a public phone-tap link, keep the required NDEF content publicly readable. If read access is password-restricted, agree a compatible application workflow and test it. A static URL or chip-originality signature alone does not authenticate the product carrying the tag. Validate the final label, mounting surface and intended phones together.
Buyer one-liner
144 bytes of user memory for a compact NFC web-link payload; validate the encoded message and phone action.
Typical use cases
- ▸Product-information web links
- ▸Contact-page links
- ▸Restaurant-menu web links
- ▸NDEF marketing posters after phone testing
Reader requirements to validate
Confirm the exact reader model, firmware, antenna, supported protocol and application or credential data with the system owner. Test the finished sample on the installed setup; a chip datasheet or shared frequency does not establish compatibility.
NFC Coin construction and approval
A coin is a compact disc carrier for a selected chip and antenna. Specify the host object, mounting method, chip, encoded content and intended phone or reader before selecting the diameter and construction. Test the finished disc after mounting, including nearby metal or liquid. Food contact, immersion and cleaning suitability require evidence and a defined test for the ordered assembly rather than a generic material claim. Confirm availability, sample costs, MOQ and delivery in the quote.
Typical sizes
- • Confirm diameter and thickness from the selected model drawing
- • Check recess or adhesive mounting clearance
Materials
- • PVC or other specified disc substrate
- • Adhesive or fixture attachment selected for the host surface
Document scope to verify
Request current documents for the exact finished article, materials and destination. A form-factor name does not establish a certification or IP rating.
Why source NXP NTAG213 nfc coins from RFIDAK
An NTAG213 coin is a small round carrier for an NDEF record or another application-approved identifier. Compare its actual dimensions, encapsulation, mounting method and phone or reader behavior with the intended use. A tag alone does not verify a patrol visit, authenticate a loyalty account or record a timestamp; those functions require connected software and an approved data process. Confirm the proposed chip and finished construction in the sample and written quote.
Buyer snapshot
Venue, patrol and asset-management teams whose workflow needs a compact mounted tag. They should define the application and data-handling requirements before selecting the coin construction.
Planning examples
Illustrative evaluation plans, not reported customer results.
Example 1
Illustrative venue plan (not a customer case): a team tests an NFC coin that opens a maintained promotion page, checks the intended phones and mounting surface, and verifies that any loyalty status remains in its own application rather than on an unprotected URL.
Example 2
Illustrative patrol test (not a customer case): an integrator mounts sample coins at representative checkpoints and checks tap behavior with the field app. It defines how the app records time, user identity and exceptions; the tag itself is only one input.
Compare with other nfc coins
Compare chip-level differences for the same form factor. Check the exact reader, credential format, finished construction and available samples before selecting a configuration.
| Chip | Memory | Security | Typical Use | Quote basis |
|---|---|---|---|---|
| NXP NTAG213 (this page) | 144 bytes user memory; allow for NDEF formatting overhead | Permanent page locking | Product-information web links | Confirm chip availability, construction and quantity in the quote |
| NXP NTAG215 | 504 bytes user memory; allow for NDEF formatting overhead | Permanent page locking | Larger approved NDEF payloads | Confirm chip availability, construction and quantity in the quote |
Recommended RFIDAK SKUs
These catalog formats are candidates for a NXP NTAG213 build. Confirm chip availability and the finished configuration in the quote.
Frequently asked — NXP NTAG213 nfc coins
What is the minimum order quantity for NXP NTAG213 nfc coins?▾
MOQ guidance for this format: Confirm by disc construction, chip and quantity per design. Pilot size and unit price depend on chip availability, format, encoding, artwork and quantity; request a written quote for the exact specification.
How should I check reader compatibility with NXP NTAG213 nfc coins?▾
Check the exact installed reader and controller model, firmware, credential profile and application data requirements. A frequency or protocol match alone does not prove compatibility. Have the system owner test a representative finished sample before authorizing production.
Can RFIDAK pre-encode NXP NTAG213 nfc coins to our specification?▾
Writable EPC, NDEF or user-memory content may be encoded to an approved specification, depending on the chip and access rights. Factory-programmed UIDs normally cannot be changed. Secure credential provisioning needs an agreed key-custody process; never submit secret keys in a public inquiry form. Confirm feasibility and price for the exact data format.
What lead time should I plan for NXP NTAG213 nfc coins to major export markets?▾
Confirm a production-ready date after the specification and sample are approved, then obtain a separate freight and import timeline for the destination. Ask for dated milestones in the project quote rather than relying on a form-factor average.
Which documents apply to NXP NTAG213 nfc coins?▾
Document scope depends on the exact material, chip, reader and destination market. Ask RFIDAK to identify the applicable certificate or test report for the quoted SKU; a company certificate or another product's report does not automatically certify this configuration.
Ready to source NXP NTAG213 nfc coins?
Send the chip preference, reader and application requirements, quantity, and destination. Confirm availability, sample terms, unit pricing and production schedule for the proposed configuration. Standard form-factor MOQ baseline: Confirm by disc construction, chip and quantity per design.
Request a Configuration QuoteTest RFID Samples Before You Order
Free stock samples (up to 5 pieces) — buyer covers DHL/FedEx freight ($25–60), refunded 1:1 against the first production order over $500. Custom samples may cost extra. Confirm the sample configuration, availability and dispatch date before shipment.
Request the RFIDAK product catalog (PDF). Our team will reply by email.
We'll only use your email to send the catalog and reply to your inquiry.