NXP NTAG213 Wristband Supplier
RFIDAK can source NXP NTAG213 wristbands for a specified reader and application. MOQ guidance for this format: 500 pieces category baseline; confirm by material and design. Confirm the exact chip, finished construction, applicable standards, sample terms and production schedule in a written quote.
Quick spec — NXP NTAG213 Wristband
- Chip
- NXP NTAG213
- Frequency
- 13.56 MHz
- Standards
- ISO/IEC 14443 Type A / NFC Forum Type 2 Tag
- Memory
- 144 bytes user memory; allow for NDEF formatting overhead
- Security
- Permanent page locking; configurable 32-bit password for memory access; ECC chip-originality signature. No encrypted communication or per-tap message authentication
- Form Factor
- Wristband (Closed-loop sizes: request a fit sample and model drawing)
- Materials
- Silicone / PVC / Paper or synthetic paper
- MOQ
- 500 pieces category baseline; confirm by material and design
- Lead Time
- Confirm production and transit dates in the quote
Chip technical brief
NTAG213 uses NXP ordering codes beginning NT2H1311G0; confirm the complete code and package for the supplied construction. Its 144-byte user area must accommodate the approved NDEF layout and encoding overhead, so a fixed URL character limit is not a sufficient sizing rule. The manufacturer-programmed 7-byte UID is separate from writable customer content. Permanent lock bits cannot be reversed; approve the final payload before locking. For a public phone-tap link, keep the required NDEF content publicly readable. If read access is password-restricted, agree a compatible application workflow and test it. A static URL or chip-originality signature alone does not authenticate the product carrying the tag. Validate the final label, mounting surface and intended phones together.
Buyer one-liner
144 bytes of user memory for a compact NFC web-link payload; validate the encoded message and phone action.
Typical use cases
- ▸Product-information web links
- ▸Contact-page links
- ▸Restaurant-menu web links
- ▸NDEF marketing posters after phone testing
Reader requirements to validate
Confirm the exact reader model, firmware, antenna, supported protocol and application or credential data with the system owner. Test the finished sample on the installed setup; a chip datasheet or shared frequency does not establish compatibility.
Wristband construction and approval
An RFID wristband combines a specified chip and antenna with a wearable body and closure. Silicone, PVC, paper and textile formats differ in fit, wear span, printing and transfer control. Select the construction for the actual event or venue; inspect the finish and closure on representative sizes. Test the approved sample at the installed gate, locker or phone and under the required water, chlorine, cleaning and wear conditions. No form-wide IP rating, wash life or reader compatibility follows from the material name. Agree chip, artwork, sizing, closure, MOQ and timing for the selected band in the quote.
Typical sizes
- • Closed-loop sizes: request a fit sample and model drawing
- • Adjustable lengths and closures: confirm the selected construction
Materials
- • Silicone
- • PVC
- • Paper or synthetic paper
- • Woven fabric
- • Elastic fabric
Document scope to verify
Request current documents for the exact finished article, materials and destination. A form-factor name does not establish a certification or IP rating.
Why source NXP NTAG213 wristbands from RFIDAK
An NTAG213 wristband can carry an NDEF link for a phone-tap experience, subject to the finished band construction, phone hardware, settings and operating system. A web link alone does not validate admission, run a cashless wallet or prove identity; those tasks need an approved platform and security design. Select silicone, paper or another body for the actual wear period, closure and exposure, then test an encoded sample on the intended phones and readers. Confirm the exact chip, artwork, URL ownership and quantity in the quote.
Buyer snapshot
Event and hospitality teams using a phone tap to open a maintained destination or evaluating a credential with an installed event platform. The platform provider should approve any admission or payment function separately.
Planning examples
Illustrative evaluation plans, not reported customer results.
Example 1
Illustrative event plan (not a customer case): a venue encodes a controlled event-information link and tests representative phones on the finished wristband. It checks whether a printed QR fallback opens the same destination and keeps admission testing within the event platform.
Example 2
Illustrative networking plan (not a customer case): an organizer tests a contact-page or profile link on the intended phones and asks attendees to opt in to any personal-data sharing. A tap can open a destination; it does not automatically create a mutual social-network connection.
Compare with other wristbands
Compare chip-level differences for the same form factor. Check the exact reader, credential format, finished construction and available samples before selecting a configuration.
| Chip | Memory | Security | Typical Use | Quote basis |
|---|---|---|---|---|
| NXP NTAG213 (this page) | 144 bytes user memory; allow for NDEF formatting overhead | Permanent page locking | Product-information web links | Confirm chip availability, construction and quantity in the quote |
| NXP NTAG216 | 888 bytes user memory; allow for NDEF formatting overhead | Permanent page locking | Larger approved NDEF messages | Confirm chip availability, construction and quantity in the quote |
| MIFARE Classic 1K | 1,024 bytes EEPROM | Crypto-1 (deprecated since 2008 | Hotel key cards (Saflok / VingCard / Onity legacy) | Confirm chip availability, construction and quantity in the quote |
| MIFARE DESFire EV2 4K | 4,096 bytes EEPROM, up to 32 applications, 32 files per app | AES-128, Originality Signature (ECDSA), Transaction MAC, Proximity Check, Virtual Card Architecture | New transit deployments | Confirm chip availability, construction and quantity in the quote |
| MIFARE Ultralight C | 144 bytes user memory | 3DES authentication | Reusable single-line transit | Confirm chip availability, construction and quantity in the quote |
Recommended RFIDAK SKUs
These catalog formats are candidates for a NXP NTAG213 build. Confirm chip availability and the finished configuration in the quote.
RFID Wristbands
RFID Silicone Wristband
Custom RFID silicone wristbands in fixed-loop, adjustable and tamper-proof styles. Match LF, HF or NFC chips, logo printing, encoding and bu…
RFID Wristbands
RFID PVC Disposable Wristband
An RFID PVC disposable wristband combines a flexible band, selected contactless inlay and a one-way closure for a short-duration admission p…
Frequently asked — NXP NTAG213 wristbands
What is the minimum order quantity for NXP NTAG213 wristbands?▾
MOQ guidance for this format: 500 pieces category baseline; confirm by material and design. Pilot size and unit price depend on chip availability, format, encoding, artwork and quantity; request a written quote for the exact specification.
How should I check reader compatibility with NXP NTAG213 wristbands?▾
Check the exact installed reader and controller model, firmware, credential profile and application data requirements. A frequency or protocol match alone does not prove compatibility. Have the system owner test a representative finished sample before authorizing production.
Can RFIDAK pre-encode NXP NTAG213 wristbands to our specification?▾
Writable EPC, NDEF or user-memory content may be encoded to an approved specification, depending on the chip and access rights. Factory-programmed UIDs normally cannot be changed. Secure credential provisioning needs an agreed key-custody process; never submit secret keys in a public inquiry form. Confirm feasibility and price for the exact data format.
What lead time should I plan for NXP NTAG213 wristbands to major export markets?▾
Confirm a production-ready date after the specification and sample are approved, then obtain a separate freight and import timeline for the destination. Ask for dated milestones in the project quote rather than relying on a form-factor average.
Which documents apply to NXP NTAG213 wristbands?▾
Document scope depends on the exact material, chip, reader and destination market. Ask RFIDAK to identify the applicable certificate or test report for the quoted SKU; a company certificate or another product's report does not automatically certify this configuration.
Ready to source NXP NTAG213 wristbands?
Send the chip preference, reader and application requirements, quantity, and destination. Confirm availability, sample terms, unit pricing and production schedule for the proposed configuration. Standard form-factor MOQ baseline: 500 pieces category baseline; confirm by material and design.
Request a Configuration QuoteTest RFID Samples Before You Order
Free stock samples (up to 5 pieces) — buyer covers DHL/FedEx freight ($25–60), refunded 1:1 against the first production order over $500. Custom samples may cost extra. Confirm the sample configuration, availability and dispatch date before shipment.
Request the RFIDAK product catalog (PDF). Our team will reply by email.
We'll only use your email to send the catalog and reply to your inquiry.